Dallas–Fort Worth
Fixture Repair & Installation in Dallas–Fort Worth
A toilet that runs, a faucet that drips, an outdoor faucet that sprays the brick. Small jobs, mostly, and worth doing before they turn into a water bill or a rotted cabinet floor.
- Price given before work starts
- Nothing starts until you approve it
- Repair tested before the plumber leaves
The plain facts
Most fixture trouble is a worn part that costs little: a flapper or fill valve in a toilet, a cartridge in a faucet or shower valve, a wax ring, a supply line gone stiff. Replace the part and the fixture goes on working for years. When the fixture itself is cracked, corroded or no longer has parts made for it, replacing it is the better money. We'll tell you which case you have.
If you've bought your own faucet, toilet or disposal, we'll install it. Have it on site with all its parts. Ahead of pulling the old fixture, we make sure the new one suits the plumbing that's there. While we're under the sink we look at the shut-off valves and supply lines too. A new faucet on a twenty-year-old stop valve is a leak waiting its turn.
The fixture jobs that come up most
- Toilets that run, rock, seep at the base or need a second flush
- Faucets that drip or have slowed to a trickle
- Garbage disposals that hum, leak or have quit
- Shower valves that won't hold a temperature
- Outdoor faucets that leak at the handle, or inside the wall after a freeze
No surprises
How the job goes
Find the real cause
A drip is a symptom. We find the worn part behind it and check the valve and supply line feeding the fixture.
Repair or replace, priced
You hear both options when both make sense, with the price of each, before any work starts.
Fit it right
New supply lines and stops where the old ones are tired, a proper seal at the base or the deck, and nothing forced.
Test and wipe down
Every connection is checked under pressure, the fixture is run through its paces and the area is left clean.
How North Texas figures in
Hard water is the quiet reason fixtures wear out early in North Texas. Scale grinds faucet cartridges, stiffens toilet fill valves and plugs aerators and shower heads, which is how a nearly new fixture ends up dripping like one three times its age. Winter does its share too. A garden hose left on an outdoor faucet through a hard freeze can split the pipe inside the wall, and the leak doesn't show until the faucet is used in spring.
Questions about fixtures
I already bought the faucet. Will you put it in?
Yes. Leave it boxed, parts and all, until we get there. We check it against your existing plumbing first, and if something won't fit we say so before anything is taken apart.
Is a running toilet really worth fixing?
A toilet that runs can waste hundreds of gallons a day, and you pay for every one. The fix is usually a flapper or a fill valve. It's one of the smaller repairs in plumbing and one of the most often put off.
My outdoor faucet only leaks when it's turned on. Why?
Most likely it froze. A frost-proof faucet shuts off inside the wall, and if a hose was attached through a freeze, the trapped water split the tube. It holds when closed and leaks into the wall when open. Leave it off until it's replaced.
